MX Series
Drives for Pump and Fan Control Systems
In this system, a single drive is used to control multiple pumps simultaneously.
Using a pressure sensor, the water flow consumption is determined. The drive adjusts the operation and speed of each pump individually to maintain the pressure or flow at a predetermined constant value.
- 33 years of manufacturing experience.
- An annual production capacity of 40,000 units.
- The largest drive manufacturer in the Middle East.
- Certified as a Knowledge-Based Company by the Vice-Presidency for Science and Technology.
- CE Certificate of the European Community.
- Control of multiple parallel pumps simultaneously while maintaining a constant system pressure or flow rate.
- Up to three pumps can be controlled without an option card, and with an option card, up to nine pumps can be managed.
- It has an internal speed setting, allowing pressure control based on time and providing high flexibility.
- Energy-saving function: When the flow is below the required level, the system automatically stops and remains in standby mode.
- Control of normal pumps, variable-speed pumps, and sludge pumps—up to 8 different pumps can be automatically managed based on pressure feedback.
- The rated current of each pump is stored individually to ensure proper protection.
- Pump rotation function based on time, ensuring equal operating time for all pumps.
- Equipped with a speed tracking function for starting motors that are already rotating.
- Sleep and Wake-up function for turning the motor off and on when the total pump system load is disconnected.
- Input Voltage Range: 380 V+15%
- Input frequency range: 36–47 Hz
- Output voltage range: 0 to rated input voltage
- Output frequency range: 0–400 Hz
