VX Series – Single Phase
The single-phase VX series takes a single-phase input (mains power – 220 V) and provides a three-phase output. The power range of these drives is from 2.2 kW to 11 kW. VX drives are widely used across major industries in the country, including steel, oil and petrochemical, water and wastewater, cement, wire and cable manufacturing, cranes, plastics and rubber, automotive, and automotive parts. These drives are installed on machines such as printing and dyeing machines, textile machines, cutting machines, machine tools, wire drawing and rod machines, steel rolling mills, pumps and compressors, and plastic injection machines.
- 33 years of manufacturing experience.
- An annual production capacity of 40,000 units.
- The largest drive manufacturer in the Middle East.
- Certified as a Knowledge-Based Company by the Vice-Presidency for Science and Technology.
- CE Certificate of the European Community.
- Programmable digital inputs: 5 ON/OFF digital inputs and 1 high-speed pulse digital input (HDI1)
- Analog inputs: One analog input (AI1) 0–10 V, and one analog input (AI2) 0–10 V or 0–20 mA
- Relay outputs: Two programmable relay outputs
- Digital output: One transistor digital output (open collector) or high-speed pulse output
- Analog output: One analog output, 0–10 V or 0.4–20 mA
- Option card support: Allows installation of expansion cards to increase inputs and outputs
- Input voltage: 220 V+15%
- Input frequency range: 47 ~ 63 Hz
- Output voltage: 380 V+15%
- Output frequency range: 0 ~ 400 Hz
